TASK 74-21-43-100-401 Ignition Leads - Related Parts - Clean The Ignition Leads Remaining Parts, Cleaning-001

DMC:V2500-A0-74-21-4300-00A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 74-21-43-100-401 Ignition Leads - Related Parts - Clean The Ignition Leads Remaining Parts, Cleaning-001

Effectivity

FIG/ITEM

PART NO.

VARIOUS

CLAMP

VARIOUS

SHROUD

VARIOUS

BOLT

VARIOUS

WASHER

VARIOUS

CLIP

VARIOUS

NUT

VARIOUS

SPACER

General

This TASK gives the procedure to clean the ignition leads remaining parts.

The practices and processes referred to in the procedure by the TASK/SUBTASK number are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.

NOTE

Consumable Materials are given in the related SPM TASK.

Reference

Refer to the SPM for data on these items.

Cleaning Policy and Methods, SPM TASK 70-10-00-100-501.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 74-21-43-110-051-001 Clean the Remaining Parts

      WARNING

      DO NOT GET CLEANING AGENT ON YOUR SKIN OR IN YOUR EYES. PUT ON PROTECTIVE CLOTHING, GOGGLES AND A FACE MASK. USE THE FLUID IN A WELL VENTILATED AREA. DO NOT BREATHE THE VAPOR. IF YOU GET THE CLEANING FLUID ON YOUR SKIN OR IN YOUR EYES, FLUSH IT AWAY WITH WATER. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
      1. Clean the remaining parts. Refer to SPM TASK 70-11-26-300-503.

      2. Locally Swab or Wipe

    1. SUBTASK 74-21-43-110-051-002 Clean the Remaining Parts

      WARNING

      DO NOT GET CLEANING AGENT ON YOUR SKIN OR IN YOUR EYES. PUT ON PROTECTIVE CLOTHING, GOGGLES AND A FACE MASK. USE THE FLUID IN A WELL VENTILATED AREA. DO NOT BREATHE THE VAPOR. IF YOU GET THE CLEANING FLUID ON YOUR SKIN OR IN YOUR EYES, FLUSH IT AWAY WITH WATER. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
      1. Clean the remaining parts. Refer to SPM TASK 70-11-03-300-503.

      2. Aqueous clean.

Requirements After Job Completion

Follow-On Conditions

NONE