TASK 75-24-49-100-106 LPT ACC Support Assemblies - Clean, Cleaning-006

DMC:V2500-A0-75-24-4915-01A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 75-24-49-100-106 LPT ACC Support Assemblies - Clean, Cleaning-006

Effectivity

FIG/ITEM

PART NO.

02-490

3A1749

02-720

3A1752

03-490

3A1762

03-490

3A2320

03-720

3A1759

04-010

3A1745

04-410

3A1755

General

This TASK gives the procedure to clean the support assemblies of the ACC.

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used.

NOTE

For consumable materials refer to SPM TASK 70-11-03-300-503 and TASK 70-11-13-300-503.
To identify the consumable materials refer to the PCI.

Reference

Refer to SPM for data on these items. Cleaning Policy and Methods, SPM TASK 70-10-00-100-501.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 75-24-49-110-066-001 Clean the Support Assemblies

      1. Clean the support assemblies. Refer to SPM TASK 70-11-01-300-503.

      1. Aqueous cleaning.

    2. SUBTASK 75-24-49-110-066-002 Clean the Support Assemblies

      1. Clean the support assemblies. Refer to SPM TASK 70-11-13-300-503.

      1. Cleaning of components (Long soak, for cobalt and nickel base alloys and heat and corrosion resistant steels).

Requirements After Job Completion

Follow-On Conditions

NONE