TASK 75-24-49-100-110 LPT ACC Air Manifold And Ducts Remaining Parts - Clean, Cleaning-010

DMC:V2500-A0-75-24-4920-00A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 75-24-49-100-110 LPT ACC Air Manifold And Ducts Remaining Parts - Clean, Cleaning-010

Effectivity

FIG/ITEM

PART NO.

01-030

MS9696-08

01-050

MS9549-09

01-070

3A0213

01-090

3A0501

01-130

3A0214

01-480

3A2313

01-490

4W0104

01-820

3A0168

01-830

AS3303-08

02-030

MS9697-06

02-030

4W0582

02-040

3A0166

02-050

3A0167

02-050

3A2827

02-060

AS3303-08

02-070

3A0168

02-080

776440

02-080

4W0001

02-450

776440

02-450

4W0001

02-460

MS9696-06

02-460

4W0101

02-670

776440

02-670

4W0001

02-680

MS9696-06

02-680

4W0101

03-030

MS9697-06

03-030

4W0582

03-040

3A0166

03-050

3A0167

03-050

3A2827

03-060

AS3303-08

03-070

3A0168

03-080

776440

03-080

4W0001

03-400

3A0810

03-410

3A0813

03-420

4W0043

03-450

776440

03-450

4W0001

03-460

MS9696-06

03-460

4W0101

03-670

776440

03-670

4W0001

03-680

MS9696-06

03-680

4W0101

04-020

MS9697-06

04-020

4W0582

04-030

3A0166

04-040

3A0167

04-040

3A2827

04-050

AS3303-08

04-060

3A0168

04-070

776440

04-070

4W0001

04-230

776440

04-230

4W0001

04-240

MS9696-06

04-240

4W0101

04-420

MS9697-06

04-420

4W0582

04-430

3A0166

04-440

3A0167

04-440

3A2827

04-450

AS3303-08

04-460

3A0168

04-470

776440

04-470

4W0001

04-630

776440

04-630

4W0001

04-640

MS9696-06

04-640

4W0101

General

This TASK gives the procedure to clean the remaining parts.

The practices and processes referred to in the procedure are by the TASK numbers in the SPM.

Fig./item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig./item numbers are used.

References

Refer to the SPM for data on these items:

Cleaning Policy and Methods, SPM TASK 70-10-00-100-501.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 75-24-49-110-123 Clean the Bolt (01-030), (01-490), (01-830), (02-030), (02-060), (02-460), (02-680), (03-030), (03-060), (03-460), (03-680), (04-020), (04-050), (04-240), (04-420), (04-450) and (04-640)

      1. Clean the bolt.

      2. Refer to SPM TASK 70-11-59-100-501.

    1. SUBTASK 75-24-49-110-124 Clean the Washer (01-050), (02-040), (03-040), (04-030) and (04-430)

      1. Clean the washer.

      2. Refer to SPM TASK 70-11-59-100-501.

    1. SUBTASK 75-24-49-110-125 Clean the Clamp (01-090), (01-130) and (01-480)

      1. Clean the clamp.

      2. Refer to SPM TASK 70-11-59-100-501.

    1. SUBTASK 75-24-49-110-126 Clean the Nut (02-080), (02-450), (02-670), (03-080), (03-420), (03-450), (03-670), (04-070), (04-230) and (04-630)

      1. Clean the nut.

      2. Refer to SPM TASK 70-11-59-100-501.

    1. SUBTASK 75-24-49-110-127 Clean the Spacer (01-070), (01-820), (02-050), (02-070), (03-050), (03- 070), (04-040), (04-060), (04-440) and (04-460)

      1. Clean the spacer.

      2. Refer to SPM TASK 70-11-59-100-501.

    1. SUBTASK 75-24-49-110-128 Clean the Mounting Bracket Assembly (03-400) and (03-410)

      1. Clean the mounting bracket assembly.

      2. Refer to SPM TASK 70-11-59-100-501.

Requirements After Job Completion

Follow-On Conditions

NONE