Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 70-11-59-100-501 The Procedure To Clean The Remaining Non-ATA Numbered Parts
Effectivity
FIG/ITEM | PART NO. |
|---|---|
VARIOUS | BOLTS |
VARIOUS | NUTS |
VARIOUS | NUTS, LOCK |
VARIOUS | CLIPNUTS |
VARIOUS | SCREWS |
VARIOUS | WASHER |
VARIOUS | SPACER |
VARIOUS | DOWELS |
VARIOUS | E-TYPE SEALS |
VARIOUS | BRACKET |
VARIOUS | CLIPS/CLAMPS |
General
This TASK gives the procedure to clean the miscellaneous remaining non-ATA numbered parts identified in the cleaning TASKS in the EM, the CMM-MM, the CMM-THD or the CMM-EHC.
The practices and processes referred to in the procedure by the TASK number are in the SPM.
References
Refer to the SPM for data on these items.
SPM TASK 70-10-00-100-501, Cleaning - General Information.
SPM TASK 70-11-00-110-501, General Instructions on Chemical Cleaning.
SPM TASK 70-11-03-100-501, Make-up of Solutions to Aqueous degrease.
SPM TASK 70-11-03-200-502, The Test and Control of the Solutions to Aqueous degrease.
SPM TASK 70-11-03-300-503, The Procedure to Aqueous degrease.
SPM TASK 70-11-13-300-503, The One-Step Alkaline Rust Remover Procedure To Clean The Components (Long Soak For Cobalt And Nickel Base Alloys And Heat And Non Corrosion Resistant Steels).
SPM TASK 70-12-07-120-501, Dry Plastic Blasting.
SPM TASK 70-11-26-300-503, The Procedure to Locally Swab or Wipe Clean with Solvent.
NOTE
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
Clean. Refer to SPM TASK 70-11-03-300-503
SUBTASK 70-11-59-100-001 Chemically Clean the Remaining Non-ATA Numbered Parts
Clean. Refer to SPM TASK 70-11-26-300-503.
SUBTASK 70-11-59-100-002 Chemically Clean the Remaining Non-ATA Numbered Parts
Clean when required. Refer to SPM TASK 70-11-13-300-503.
SUBTASK 70-11-59-100-003 Chemically Clean the Remaining Non-ATA Numbered Parts
Clean when required. Refer to SPM TASK 70-12-07-120-501.
SUBTASK 70-11-59-100-004 Blast the Remaining Non-ATA Numbered Parts