Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 75-24-49-200-117 LPT ACC Air Manifold And Ducts Remaining Parts - Examine, Inspection-017
Effectivity
FIG/ITEM | PART NO. |
01-030 | MS9696-08 |
01-050 | MS9549-09 |
01-070 | 3A0213 |
01-090 | 3A0501 |
01-130 | 3A0214 |
01-480 | 3A2313 |
01-490 | 4W0104 |
01-820 | 3A0168 |
01-830 | AS3303-08 |
02-030 | MS9697-06 |
02-030 | 4W0582 |
02-040 | 3A0166 |
02-050 | 3A0167 |
02-050 | 3A2827 |
02-060 | AS3303-08 |
02-070 | 3A0168 |
02-080 | 776440 |
02-080 | 4W0001 |
02-450 | 776440 |
02-450 | 4W0001 |
02-460 | MS9696-06 |
02-460 | 4W0101 |
02-670 | 776440 |
02-670 | 4W0001 |
02-680 | MS9696-06 |
02-680 | 4W0101 |
03-030 | MS9697-06 |
03-030 | 4W0582 |
03-040 | 3A0166 |
03-050 | 3A0167 |
03-050 | 3A2827 |
03-060 | AS3303-08 |
03-070 | 3A0168 |
03-080 | 776440 |
03-080 | 4W0001 |
03-400 | 3A0810 |
03-410 | 3A0813 |
03-420 | 4W0043 |
03-450 | 776440 |
03-450 | 4W0001 |
03-460 | MS9696-06 |
03-460 | 4W0101 |
03-670 | 776440 |
03-670 | 4W0001 |
03-680 | MS9696-06 |
03-680 | 4W0101 |
04-020 | MS9697-06 |
04-020 | 4W0582 |
04-030 | 3A0166 |
04-040 | 3A0167 |
04-040 | 3A2827 |
04-050 | AS3303-08 |
04-060 | 3A0168 |
04-070 | 776440 |
04-070 | 4W0001 |
04-230 | 776440 |
04-230 | 4W0001 |
04-240 | MS9696-06 |
04-240 | 4W0101 |
04-420 | MS9697-06 |
04-420 | 4W0582 |
04-430 | 3A0166 |
04-440 | 3A0167 |
04-440 | 3A2827 |
04-450 | AS3303-08 |
04-460 | 3A0168 |
04-470 | 776440 |
04-470 | 4W0001 |
04-630 | 776440 |
04-630 | 4W0001 |
04-640 | MS9696-06 |
04-640 | 4W0101 |
General
This TASK gives the procedure for the inspection of the remaining parts.
Fig/item numbers in parentheses in the procedure agree with those used in the IPC.
The policy that is necessary for inspection is given in SPM TASK 70-20-00-200-501.
All the parts must be cleaned before any part is examined. Refer to Cleaning-000 TASK 75-24-49-100-100.
All parts must be visually examined for damage, corrosion and wear. Any defects that are not identified in the procedure must be referred to IAE.
Do not discard any part until you are sure there are no repairs available. Refer to the instructions in Repair before a discarded part is used again or oversized parts are installed.
Parts which should be discarded can be held although no repair is available. The repair of a discarded part could be shown to be necessary at a later date.
All parts must be examined to make sure that all the repairs have been completed satisfactorily.
The practices and processes referred to in the procedure by the TASK numbers are in the SPM.
References
Refer to the SPM for data on these items.
Definitions of Damage, Refer to SPM TASK 70-02-02-350-501.
Record and Control of the Lives of Parts, Refer to SPM TASK 70-05-00-220-501.
Inspection of Parts, Refer to SPM TASK 70-20-00-200-501.
Some data on these items is contained in this TASK. For more data on these items refer to the SPM.
Method of Testing for Crack Indications
Chemical Processes.
Surface Protection
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
Refer to SPM TASK 70-21-03-100-501.
Bolt
SUBTASK 75-24-49-210-055 Examine the Bolt (01-030), (01-490), (01-830), (02-030), (02-060), (02- 460), (02-680), (03-030), (03-060), (03-460), (03-680), (04-020), (04- 050), (04-240), (04-420), (04-450) and (04-640)
Refer to SPM TASK 70-21-03-100-501.
Washer
SUBTASK 75-24-49-210-056 Examine the Washer (01-050), (02-040), (03-040), (04-030) and (04-430)
Refer to SPM TASK 70-21-03-100-501.
Clamp
SUBTASK 75-24-49-210-057 Examine the Clamp (01-090), (01-130) and (01-480)
Refer to SPM TASK 70-21-03-100-501.
Nut
SUBTASK 75-24-49-210-058 Examine the Nut (02-080), (02-450), (02-670), (03-080), (03-420), (03- 450), (03-670), (04-070), (04-230) and (04-630)
Refer to SPM TASK 70-21-03-100-501.
Spacer
SUBTASK 75-24-49-210-059 Examine the Spacer (01-070), (01-820), (02-050), (02-070), (03-050), (03-070), (04-040), (04-060), (04-440) and (04-460)
Refer to SPM TASK 70-21-03-100-501.
Mounting bracket assembly.
SUBTASK 75-24-49-210-060 Examine the Mounting Bracket Assembly (03-400) and (03-410)