TASK 79-21-43-100-401 Fuel Cooled Oil Cooler (FCOC) - Related Parts - Clean The Pin, Cleaning-001

DMC:V2500-A0-79-21-4300-00A-251A-C|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 79-21-43-100-401 Fuel Cooled Oil Cooler (FCOC) - Related Parts - Clean The Pin, Cleaning-001

Effectivity

FIG/ITEM

PART NO.

01-115

5T0064

01-115

5T8267

01-115

5T8266

General

This TASK gives the procedure to clean the pin.

The practices and processes referred to in the procedure by the TASK number are in the SPM.

Fig/Item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/Item numbers are used. For the service bulletin alpha variants refer to the IPC.

References

Refer to the SPM for data on these items.

Cleaning Policy and Method, SPM TASK 70-10-00-100-501.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 79-21-43-110-051-001 Clean the Pin

      1. Clean. Refer to SPM TASK 70-11-26-300-503.

      2. Locally Swab or Wipe.

      1. Dry

      2. Dry air blast.

    1. SUBTASK 79-21-43-110-051-002 Clean the Pin

      1. Clean. Refer to SPM TASK 70-11-26-300-503.

      2. Mild clean.

Requirements After Job Completion

Follow-On Conditions

NONE