TASK 72-32-89-100-001-A00 Fan Case Outer Acoustic Transition Liner Panel - Clean, Cleaning-001

DMC:V2500-A1-72-32-8900-00A-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

V2500-A1

Common Information

TASK 72-32-89-100-001-A00 Fan Case Outer Acoustic Transition Liner Panel - Clean, Cleaning-001

Effectivity

FIG/ITEM

PART NO.

01-100

5R0012

General

This TASK gives the procedure to clean the linings.

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used.

Reference

Refer to TASK 70-10-00-100-501 Cleaning - General Information.

NOTE

To identify the consumable materials refer to the PCI.
Other consumable materials are given in TASK 70-11-26-300-503.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 01-076 METHYL ETHYL KETONELOCALCoMat 01-076

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-89-110-052 Clean the Linings

      1. Clean. Refer to the SPM TASK 70-11-26-300-503

      2. Do not put the lining fully in to the trichloroethane. Use a soft bristle brush or swab.

      1. Dry.

      2. Dry air blast.

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:LOCAL
Supply Number:CoMat 01-076
Type:sp01
Supply Short Name:CoMat 01-076 METHYL ETHYL KETONE
Supply Name:CoMat 01-076 METHYL ETHYL KETONE
Specification Groups:
Doc NumberType
METHYL ETHYL KETONE, TECHNICAL GRADE, CERTIFIED TO BSI BS 1940 OR ASTM D740, OR TT-M-261
Suppliers:
ManufacturerRemarks
LOCAL