TASK 70-35-25-300-001-F01 Replace The Sleeve Markers Of The Electrical Harness, Repair-001 (VRS7002)

DMC:V2500-00-70-35-25-05A-920A-D|Issue No:003.00|Issue Date:2018-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 70-35-25-300-001-F01 Replace The Sleeve Markers Of The Electrical Harness, Repair-001 (VRS7002)

General

This TASK details the procedure for the replacement of the sleeve markers on the electrical contacts.

The replacement of metal tags for use with externally braided harnesses is detailed in the relevant Chapter/Section/Subject section for that type of harness.

Refer to repair, VRS7002 SPM TASK 70-35-25-300-001 (REPAIR-001) for the following:

Effectivity

Equipment and materials

General

All illustrations/Figs

Heat Transfer Printer Examples: CTK SP2000, 3000 series, or Brady TLS2200

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 01-410 ISOPROPYL ALCOHOL, REAGENT GRADE0AL61CoMat 01-410
CoMat 01-489 DIELECTRIC SOLVENT0WU71CoMat 01-489
CoMat 01-492 CLEANER SOLVENT023V4CoMat 01-492

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 70-35-25-110-001 Chemically Clean the Harness

      1. CAUTION

        MAKE SURE THERE IS NO REMAINING SOLVENT CLEANER IN THE ELECTRICAL HARNESS.

        Chemically clean the parts.

      1. Refer to SPM TASK 70-11-57-110-501. Use a clean white lint free cloth moist with CoMat 01-410 ISOPROPYL ALCOHOL, REAGENT GRADE or CoMat 01-489 DIELECTRIC SOLVENT or CoMat 01-492 CLEANER SOLVENT. Use chemical cleaning equipment.

      2. Dry the parts.

      1. Use clean dry air blast.

    2. SUBTASK 70-35-25-350-033 Remove the Damaged Sleeve Marker and Protective Sleeve

      1. CAUTION

        DO NOT CUT THE CABLE.

        Cut off the damaged sleeve marker and remove the protective sleeve.

      1. Use a knife.

    3. SUBTASK 70-35-25-350-034 Install the New Sleeve Marker for the Cable Identification

    1. Refer to Figure.

      2. Trim the heat shrinkable tube and write the identification code.

      1. Use a heat transfer printer (see General section for examples). Write the cable identification code for the cables. Write the connector or receptacle and terminal code for connector or receptacle terminals respectively. Write the part number and serial number for the harness assembly.

    3. Install the heat shrinkable tube on the cable.

      4. Heat the heat shrinkable tube.

      1. Use a hot air gun. Set to deliver between 480 deg F and 570 deg F (250 deg C and 300 deg C).

    4. SUBTASK 70-35-25-350-035 Install the Protective Sleeve

    1. Refer to Figure.

    2. Trim the heat shrinkable tube.

    3. Install the heat shrinkable tube on the cable.

      4. Heat the heat shrinkable tube.

      1. Us a hot air gun. Set to deliver between 480 deg F and 570 deg F (250 deg C and 300 deg C).

    5. SUBTASK 70-35-25-350-056 Identify the Repair

      1. Make a mark VRS7002/F on the identification sleeve of the harness adjacent to the part number.

      1. Use permanent marker.

    6. Figure: Repair details and dimensions

    Repair details and dimensions

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Added identification procedure. (18VC225)

Change Type:

Revised the title. (Editorial)

Manufacturer Code:023V4
Enterprise Name:CRC INDUSTRIES INC
BU Name:CRC INDUSTRIES INC
Street:885 LOUIS DR
P.O. Box:5000
City:WARMINSTER
State:PA
Zip Code:18974-0586
Country:USA
Phone Number:1-215-674-4300, 1-800-272-4620
Fax Number:1-215-674-2196
Internet:www.crcindustries.com
Manufacturer Code:0AL61
Enterprise Name:MILLIPORESIGMA
BU Name:MILLIPORESIGMA
Street:400 SUMMIT DR
City:BURLINGTON
State:MA
Zip Code:01803
Country:UNITED STATES OF AMERICA
Manufacturer Code:0WU71
Enterprise Name:ECOLINK INC.
BU Name:ECOLINK INC.
Street:1481 ROCK MOUNTAIN BOULEVARD
City:STONE MOUNTAIN
State:GA
Zip Code:30083-1505
Country:USA
Phone Number:1-800-886-8240, 1-770-621-8240
Fax Number:1-770-621-8245
Email:info@ecolink.com
Internet:www.ecolink.com
Manufacturer Code:0AL61
Supply Number:CoMat 01-410
Type:sp01
Supply Short Name:CoMat 01-410 ISOPROPYL ALCOHOL, REAGENT GRADE
Supply Name:CoMat 01-410 ISOPROPYL ALCOHOL, REAGENT GRADE
Specification Groups:
Doc NumberType
PMC 9016 (PW REF)PX1834
Suppliers:
ManufacturerRemarks
0AL61
Manufacturer Code:0WU71
Supply Number:CoMat 01-489
Type:sp01
Supply Short Name:CoMat 01-489 DIELECTRIC SOLVENT
Supply Name:CoMat 01-489 DIELECTRIC SOLVENT
Specification Groups:
Doc NumberType
PMC 8920POSITRON (ULTRA-HIGH PURITY)
Suppliers:
ManufacturerRemarks
0WU71
Manufacturer Code:023V4
Supply Number:CoMat 01-492
Type:sp01
Supply Short Name:CoMat 01-492 CLEANER SOLVENT
Supply Name:CoMat 01-492 CLEANER SOLVENT
Specification Groups:
Doc NumberType
SPMC 168C.I.C Remover
Suppliers:
ManufacturerRemarks
023V4