Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 71-00-02-000-009 (A1/A5-PPBU) - Remove The P2/T2 Probe Hose Assembly, Removal-009
General
Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha variants refer to the IPC.
For all parts identified in a different Chapter/Section/Subject, the applicable Chapter/Section/Subject comes before the Fig./item number.
Apply the approved penetrating oil before the removal of threaded parts. Let the parts soak before removal. For the approved oils and procedures, refer to SPM TASK 70-64-00-640-501.
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
Refer to Figure.
Disconnect the P2/T2 probe hose assembly ENGINE FUEL AND CONTROL-P2/T2 PROBE ASSEMBLY (73-22-48, 02-020) from the P2/T2 union P2/T2 Sensor Air Tube (73-22-48, 01-040) at the cowl aft bulkhead.
Disconnect the P2/T2 probe hose assembly ENGINE FUEL AND CONTROL-P2/T2 PROBE ASSEMBLY (73-22-48, 02-020) from the P2 tube.
SUBTASK 71-00-02-020-005 Remove the P2/T2 Probe Hose Assembly
Figure: Remove the P2/T2 Probe Hose Assembly
Remove the P2/T2 Probe Hose Assembly
