TASK 72-00-32-050-015 LPC/Intermediate Case Module Components - Remove The IDG Oil Temperature Thermocouple, Removal-022

DMC:V2500-A0-72-00-3250-14A-520A-B|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-00-32-050-015 LPC/Intermediate Case Module Components - Remove The IDG Oil Temperature Thermocouple, Removal-022

General

This TASK gives the procedure to remove the IDG oil temperature thermocouple.

Fig/item numbers in parentheses in the procedure agree with those used in the IPC. Only the primary Fig/item numbers are used. For the service bulletin alpha-variants refer to the IPC.

For all parts identified in a different Chapter/Section/Subject, the applicable Chapter/Section/Subject comes before the Fig/item number.

Apply the approved CoMat 10-058 PENETRATING OIL before the removal of threaded parts. Let the parts soak before removal.

Discard all rubber seal rings removed in this procedure.

The thermocouple removed in the procedure must have their maintenance completed, as given in the Toshiba Component Maintenance Manual (24-21-15).

Seal all openings when the components are disconnected to prevent contamination from unwanted material.

NOTE

To identify the consumable materials refer to the PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-099 LINT-FREE CLOTHLOCALCoMat 02-099
CoMat 10-058 PENETRATING OIL0AM53CoMat 10-058

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-00-32-030-050 Disconnect the Electrical Connector

    1. Refer to Figure.

    2. Disconnect the electrical connector of EEC harness EEC Fan Harness (71-51-41, 01-005) from the IDG oil temperature thermocouple IDG OIL TEMPERATURE THERMOCOUPLE (24-21-15, 01-100).

    2. SUBTASK 72-00-32-050-061 Remove the IDG Oil Temperature THermocouple

    1. Refer to Figure.

    2. WARNING

      DO NOT GET ENGINE OIL ON YOUR SKIN FOR A LONG TIME. FLUSH THE OIL FROM YOUR SKIN WITH WATER. THE OIL IS POSIONOUS AND CAN GO THROUGH YOUR SKIN AND IN TO YOUR BODY.

      Remove the two bolts IDG OIL TEMPERATURE THERMOCOUPLE (24-21-15, 01-110) that attach the IDG oil temperature thermoucouple IDG OIL TEMPERATURE THERMOCOUPLE (24-21-15, 01-100) to the IDG FCOC and position the container to catch the oil spill.

    3. Remove the thermocouple IDG OIL TEMPERATURE THERMOCOUPLE (24-21-15, 01-100) with IDG OIL TEMPERATURE THERMOCOUPLE (24-21-15, 01-120) sealing ring 1 off. Discard the sealing ring.

    4. Use CoMat 02-099 LINT-FREE CLOTH to remove oil leakage.

    3. Figure: IDG oil temperature thermocouple

    IDG oil temperature thermocouple

Requirements After Job Completion

Follow-On Conditions

NONE
Manufacturer Code:0AM53
Enterprise Name:IAE INTERNATIONAL AERO ENGINES AG
BU Name:NULL
Building:SUITE 400
Street:628 HEBRON AVENUE
City:GLASTONBURY
State:CT
Zip Code:06033
Country:USA
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:X222X
Supply Number:CoMat 02-099
Type:sp01
Supply Short Name:CoMat 02-099 LINT-FREE CLOTH
Supply Name:CoMat 02-099 LINT-FREE CLOTH
Specification Groups:
Doc NumberType
WHERE COMAT 02-099 IS SPECIFIED WITH NO SUFFIX, USE COMAT 02-099A OR COMAT 02-099B.
Suppliers:
ManufacturerRemarks
X222X
Manufacturer Code:X222X
Supply Number:CoMat 10-058
Type:sp01
Supply Short Name:CoMat 10-058 PENETRATING OIL
Supply Name:CoMat 10-058 PENETRATING OIL
Suppliers:
ManufacturerRemarks
X222X