TASK 72-32-93-100-001-B00 Intermediate Structure Front Splitter - Clean, Cleaning-001

DMC:V2500-A0-72-32-9302-00B-251A-C|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-32-93-100-001-B00 Intermediate Structure Front Splitter - Clean, Cleaning-001

Effectivity

FIG/ITEM

PART NO.

01-200

5A0460

General

This TASK gives the procedure to clean the splitter fairing assembly. For the other intermediate structure front fairing parts, refer to V2500-A0-72-32-9300-00A-251A-C (CLEANING-000).

The practices and processes referred to in the procedure by the TASK numbers are in the SPM.

References

Refer to the SPM for data on these items.

Cleaning Policy and Methods, SPM TASK 70-10-00-100-501

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 72-32-93-110-054 Remove the Soft Dirt and Dust

      1. Remove the soft dirt and dust. Refer to the SPM TASK 70-11-26-300-503.

      1. Solvent cleaning.

    2. SUBTASK 72-32-93-110-055 Remove the Paint (PL205)

    1. Remove the paint. Refer to the SPM TASK 70-11-29-300-503.

Requirements After Job Completion

Follow-On Conditions

NONE