TASK 72-00-00-000-000 Engine General - Replace The No. 5 Bearing Carbon Seal Assembly, Special Procedures-000 - DELETED

DMC:V2500-A1-72-00-0000-00A-920A-B|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

V2500-A1

Common Information

TASK 72-00-00-000-000 Engine General - Replace The No. 5 Bearing Carbon Seal Assembly, Special Procedures-000 - DELETED

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Information for the A1 Model Replacement of the No. 5 Bearing Carbon Seal Assembly is Contained in the TASKS that follow:

    1. Replace the No. 5 Bearing Carbon Seal Assembly TASK 72-00-00-000-001-A00 (SPECIAL PROCEDURES-001 CONFIG-001, PRE SBE 72-0063)

      Replace the No. 5 Bearing Carbon Seal Assembly TASK 72-00-00-000-001-B00 (SPECIAL PROCEDURES-001 CONFIG-002, SBE 72-0063)

Requirements After Job Completion

Follow-On Conditions

NONE