TASK 72-60-32-300-010 Angle Gearbox Support - Nickel Plate The Mounting Face, Repair-010 (VRS5119)

DMC:V2500-A1-72-60-3201-03A-647A-C|Issue No:002.00|Issue Date:2018-08-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-60-32-300-010 Angle Gearbox Support - Nickel Plate The Mounting Face, Repair-010 (VRS5119)

Effectivity

FIG/ITEM

PART NO.

01-300

4B0062

01-300

4B0353

01-300

4B0374

Material of component

RR

DESCRIPTION

SYMBOL

MATERIAL

Support

-

Aluminum alloy

General

Price and availability - none

The practices and processes referred to in the procedure by the TASK numbers are in SPM.

NOTE

To identify the consumable materials refer to PCI.

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NameManufacturerPart Number / IdentificationQuantityRemark
Workshop inspection equipmentLOCALWorkshop inspection equipment
Hot air gunLOCALHot air gun
Grinding machineLOCALGrinding machine
FPI inspection stationLOCALFPI inspection station
BasketLOCALBasket
Vapor degreaserLOCALVapor degreaser
Process Plating TanksLOCALProcess plating tanks
OvenLOCALOven
Magnifying glass, 4XLOCALMagnifying glass, 4X
Vibrating marking pencilLOCALVibrating marking pencil

Consumables, Materials and Expendables

NameManufacturerPart Number / IdentificationQuantityRemark
CoMat 02-067 STRIPPABLE COATING71410CoMat 02-067

Spares

NONE

Safety Requirements

NONE

Procedure

    1. SUBTASK 76-60-32-350-065 Remove the Inserts

    1. Refer to Figure.

      2. Remove the three inserts from the support.

      1. Refer to Repair, VRS5045 TASK 72-60-32-300-012 (REPAIR-012) for pre service bulletin 72-0492 parts.

      2. Refer to Repair, VRS5676 TASK 72-60-32-300-021 (REPAIR-021) for post service bulletin 72-0492 and 70-0950 parts.

    2. SUBTASK 72-60-32-320-061 Machine the Mounting Face of the Support

    1. Refer to Figure.

      2. Machine the mounting face.

      1. The dimension must be between 10.3746 in. and 10.3659 in. (263.515 mm and 263.294 mm) in relation to surface E after the removal of the damage.

      2. Remove all damage and wear.

      3. Keep the removal of material to the minimum necessary to remove the damage.

    3. SUBTASK 72-60-32-230-058 Examine the Support

      1. Do the fluorescent penetrant inspection for cracks.

      1. Refer to SPM TASK 70-23-01-230-501.

      2. No cracks are permitted.

    4. SUBTASK 72-60-32-330-059 Nickel Plate the Mounting Face of the Support

    1. Refer to Figure.

      2. Mask the areas of the support not to be plated.

      3. Do the nickel plating.

      1. Refer to SPM TASK 70-33-08-300-503.

      2. Plate to a sufficient thickness to permit the machining to the last dimensions.

      3. The plating out of the mounting face is permitted but must be removed.

    4. Remove the mask.

      5. Clean and dry the support.

      1. Flush with cold water.

      2. Flush with hot water.

      3. Dry with air blast.

    5. SUBTASK 72-60-32-370-055 De-embrittle the Support

      1. Put the support into an oven at 241 deg F to 260 deg F (116 deg C to 127 deg C) for 60 to 90 minutes.

      1. Do this process as soon as possible in less than 4 hours after the plating.

    6. SUBTASK 72-60-32-220-079 Examine the Support

      1. Do the visual inspection of the plating for finish, cracks and adhesion.

      1. Plating must have a constant color.

      2. No circumferential cracks are permitted.

      3. No rough and blistering are permitted.

    7. SUBTASK 72-60-32-320-062 Machine the Mounting Face of the Support

    1. Refer to Figure.

      2. Machine the mounting face.

      1. The last dimension must be between 10.3778 in. and 10.3758 in. (263.596 mm and 263.545 mm).

      2. Chamfer where necessary.

    8. SUBTASK 72-60-32-220-080 Examine the Nickel Plated Area

    1. Refer to Figure.

      2. Do the visual inspection of the plated area for cracks and adhesion.

      2. The natural network crack, emphasized by grinding, is permitted.

      3. Measure the thickness of the plating.

      1. Do not accept thickness less than 0.0006 in. (0.015 mm) after the last machining.

    9. SUBTASK 72-60-32-350-066 Install the New Inserts

    1. Refer to Figure.

      2. Install the three new inserts.

      1. Refer to Repair, VRS5045 TASK 72-60-32-300-012 (REPAIR-012) for pre service bulletin 72-0492 parts.

      2. Refer to Repair, VRS5676 TASK 72-60-32-300-021 (REPAIR-021) for post service bulletin 72-0492 and 70-0950 parts.

    10. SUBTASK 72-60-32-350-067 Record the Repair

      1. Vibro engrave VRS5119 adjacent to the part number.

      1. Remove the metal lifted by marking.

    11. Figure: Nickel Plate the Mounting Face of the Angle Gearbox Support

    Nickel Plate the Mounting Face of the Angle Gearbox Support

Requirements After Job Completion

Follow-On Conditions

NONE
Change Type:

Revised model applicability and effectivity table to add part numbers. (17VF828)

Manufacturer Code:71410
Enterprise Name:HENKEL CORPORATION (WAS: TURCO PRODUCTS, INC)
BU Name:HENKEL CORPORATION (WAS: TURCO PRODUCTS, INC)
Street:32100 STEPHENSON HIGHWAY
City:MADISON HEIGHTS
State:MI
Zip Code:48071
Country:USA
Phone Number:1-248-583-9300
Fax Number:1-248-583-2976
Internet:www.aerospace.henkel.com
Manufacturer Code:LOCAL
Enterprise Name:LOCALLY SUPPLIED
Manufacturer Code:71410
Supply Number:CoMat 02-067
Type:sp01
Supply Short Name:CoMat 02-067 STRIPPABLE COATING
Supply Name:CoMat 02-067 STRIPPABLE COATING
Specification Groups:
Doc NumberType
TURCO 5580-G PMC 1835
Suppliers:
ManufacturerRemarks
71410
Manufacturer Code:LOCAL
Tool Number:Basket
Tool Name:Basket
Link not Found
Link not Found
Link not Found
Link not Found
Manufacturer Code:LOCAL
Tool Number:Oven
Tool Name:Oven
Manufacturer Code:LOCAL
Tool Number:Process plating tanks
Tool Name:Process Plating Tanks
Link not Found
Link not Found
Manufacturer Code:LOCAL
Tool Number:Workshop inspection equipment
Tool Name:Workshop inspection equipment