Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Description
TASK 72-60-00-100-000 External Gearbox Module - The Table Of Part Numbers/Task Numbers, Cleaning-000
General
This TASK gives the procedures to clean the External Gearbox Assembly parts.
The practices and processes referred to in the procedure by the TASK number are in SPM.
References
Refer to SPM TASK 70-10-00-100-501 for important cleaning information that supplements the TASKs.
When more than one TASK is specified for a part, refer to SPM TASK 70-10-00-100-501 for selection of the applicable cleaning TASK.
Refer to SPM TASK 70-10-00-100-501 for the TASK numbers given below.
Procedure
The parts in the Table are listed in numerical order by ATA Number.
The TASK numbers in Table are listed in sequential numerical order.
Table 1. ATA
PART NAME.
ITEM PART NO.
TASK
72-60-00
External Gearbox Module - Brackets
5W0075, 5W8255, 5W8361, 6A4673, 6A6485
72-60-00
External Gearbox Module - External Gearbox Module Remaining Parts
4P0260, 4T0215, 4W0002
72-60-10
Main Gearbox Assembly - The Oil Nozzles (AL)
4B0221, 4B0234, 4B0235, 4B0236, 4B0237, 4B0238, 4B0239, 4P0291
72-60-10
Main Gearbox Assembly - Main Gearbox Assembly Remaining Parts
4B7172, 4B7265, 4B7354, 4P7171, 4P7230, 4P7266, 4P7355, 4W0002, 4W1249, 740-5403-503, 740-5640-503, 740-5713-503, 740-5714-507
TASK 70-12-07-120-501 (See note)
NOTE
If necessary, abrasive blast by TASK 70-12-07-120-501 only after chemical cleaning TASK 70-11-03-300-503.NOTE
Remember to mask and plug openings to avoid media entrapment.72-60-21
Crank Cover (AL)
4P0084
72-60-21
Main Gearbox Casing (AL)
4B0053, 4B0054, 4B0055, 4B0057, 4B0400, 4B0402, 4B0423
72-60-21
Oil Adapters
4P0096, 4P0115 (ST)
72-60-22
Starter Drive Gear Rotating Seal Ring (ST)
7T0453, 7T0473
72-60-22
Starter Drive Gear Housing (AL)
4B0248, 4B0349, 4B0371
72-60-22
Starter Drive Gear (ST)
4P0006
72-60-22
Starter Drive Carbon Seal Housing (AL)
4P0015
72-60-22
Starter Drive Gear Bearings
4T0071, 4T0073, 4T0074, 4T0075, 4T0076, 4T0091, 4T0093, 4T0094, 4T0095, 4T0096
72-60-22
Starter Drive Carbon Seal
7T0262, 7T0452, 7T0472
72-60-22
Starter Drive Gear Shroud (ST)
4P0187
72-60-22
Starter Drive Gear and Housing Assembly Remaining Parts
4W0002, 4W1246
72-60-23
Hydraulic Pump Drive Gear Housing (AL)
4B0192, 4B0313, 4B0350, 4B0372
72-60-23
Hydraulic Pump Drive Gear (ST)
4P0011
72-60-23
Hydraulic Pump Drive Gear Bearings
4T0071, 4T0073, 4T0074, 4T0075, 4T0076, 4T0119, 4T0121, 4T0122, 4T0123, 4T0124
72-60-23
Hydraulic Pump Drive Gear Rotating Seal Ring (ST)
7T0453, 7T0473
72-60-23
Hydraulic Pump Drive Carbon Seal
4T0302, 4T0303, 7T0262, 7T0452, 7T0472
72-60-23
Hydraulic Pump Drive Gear Shroud
4P0310, 4P0311 (ST)
4B0247
72-60-23
Hydraulic Pump Drive Gear and Housing Assembly Remaining Parts
4P0114, 4P0015 (AL), 4W0002
72-60-24
PMA Drive Housing (AL)
4B0292, 4B0352
72-60-24
Input Gearshaft (ST)
4P0175, 4P0285, 4P0287, 4P0294
72-60-24
Input Gearshaft Bearings
4T0041, 4T0043, 4T0044, 4T0045, 4T0046, 4T0051, 4T0053, 4T0054, 4T0055, 4T0056
72-60-24
Extension Layshaft Gear and Bearing Assembly Remaining Parts
4T0210, 4W0002
72-60-25
Fuel Pump Drive Gear Housing (AL)
4B0087, 4B0351, 4B0373
72-60-25
Fuel Pump Drive Gear (ST)
4P0264, 4P0405
72-60-25
Fuel Pump Drive Bearings
4T0071, 4T0073, 4T0074, 4T0075, 4T0076, 4T0119, 4T0121, 4T0122, 4T0123, 4T0124
72-60-25
Fuel Pump Drive Gear Rotating Seal Ring (ST)
7T0453, 7T0473
72-60-25
Fuel Pump Drive Carbon Seal
7T0262, 7T0452, 7T0472
72-60-25
Fuel Pump Drive Gear Shroud
4B0407 (ST)
4B0246, 4B0282
72-60-25
Fuel Pump Drive Gear and Bearing Assembly - Remaining Parts
4P0015 (AL)
4W0002, 4W1246
72-60-26
Oil Scavenge Pump Drive Gear (ST)
4P0010
72-60-26
Oil Scavenge Pump Drive Bearings
4T0071, 4T0073, 4T0074, 4T0075, 4T0076, 4T0119, 4T0121, 4T0122, 4T0123, 4T0124
72-60-26
Oil Scavenge Pump Drive Gear Shroud (ST)
4P0189
72-60-27
Starter Idler Gear (ST)
4B0182
72-60-27
Starter Idler Gear Bearings
4T0061, 4T0063, 4T0064, 4T0065, 4T0066
72-60-27
Starter Idler Gear Shroud (ST)
4P0188, 4P0270
72-60-28
Generator Drive Gear Rotating Seal Ring (ST)
7T0457, 7T0477
72-60-28
Generator Drive Gear Housing (AL)
4B0161, 4B0271, 4B0281, 4B0312, 4B0348, 4B0370
72-60-28
Generator Drive Gear (ST)
4P0207
72-60-28
Generator Drive Gear Carbon Seal Housing (AL)
4P0168
72-60-28
Generator Drive Gear Bearings
4T0071, 4T0073, 4T0074, 4T0075, 4T0076, 7T7100, 7T7102
72-60-28
Generator Drive Gear Carbon Seal
7T0266, 7T0456, 7T0476
72-60-28
Generator Drive Gear and Housing Assembly - Remaining Parts
4W0002, 4W0004, 4W1246
72-60-29
Deoiler Rotating Seal Ring (ST)
7T0455, 7T0475
72-60-29
Deoiler Gear Housing (AL)
4B0088, 4B0315, 4B0347
72-60-29
Deoiler Gear (ST)
4B0004
72-60-29
Deoiler Gear Bearings
4T0084, 4T0085, 4T0087, 4T0088, 4T0089, 4T0101, 4T0103, 4T0107, 4T0115, 4T0116
72-60-29
Deoiler Impeller (ST)
4B7257, 4B7326
72-60-29
Deoiler Gear, Impeller and Housing Assembly Remaining Parts
7T0343, 7T0390 (ST), 7T0391
4W0002
72-60-31
Deoiler Casing (AL)
4B7153, 4B7262, 4B7361
TASK 70-12-07-120-501 (See note)
NOTE
If necessary, abrasive blast by TASK 70-12-07-120-501 only after chemical cleaning TASK 70-11-03-300-503.NOTE
Remember to mask and plug openings to avoid media entrapment.72-60-31
Deoiler Carbon Seal
7T0264, 4T0277, 7T0454, 7T0474
72-60-31
Deoiler Air Port Casing (AL)
4B7049
72-60-31
Deoiler Strainer (AL)
4B7078
72-60-31
Deoiler Case Assembly Remaining Parts - Bolt
4W0167
72-60-32
Angle Gearbox Support
4B0062 (AL)
4B0353, 4B0374
72-60-32
Gearbox Oil Suction Strainer (ST)
4B0217
72-60-33
PMA Drive Gear (ST)
4B0286, 4B0293
72-60-33
PMA Rotor Shaft (ST)
4B0254
72-60-33
PMA Support (ST)
4B0289
NOTE
If necessary, chemical cleaning by TASK 70-11-54-300-503 only after TASK 70-11-03-300-503.72-60-33
PMA Rotor Shaft Bearings
4T0181, 4T0183, 4T0184, 4T0185, 4T0186
72-60-33
PMA Oil Nozzle (AL)
4P0222
72-60-33
PMA Shaft, Rotor and Housing Assembly Remaining Parts
4P0149, 4P0152, 4P0269, 4W0002, 4W0004, 4W0163
72-60-40
Angle Gearbox Assembly - Oil Nozzles
4B0241 (AL)
4B0252
72-60-40
Angle Gearbox Assembly - Remaining Parts
4W0002, 740-5709-507, 740-5709-509, 740-5709-511, 740-5718-509
72-60-41
Angle Gearbox Casing (AL)
4B0256, 4B0354
TASK 70-12-07-120-501 (See note)
NOTE
If necessary, abrasive blast by TASK 70-12-07-120-501 only after chemical cleaning TASK 70-11-03-300-503.NOTE
Remember to mask and plug openings to avoid media entrapment.72-60-41
Angle Gearbox Oil Strainer
4B0242
72-60-41
Angle Gearbox Oil Adapter (AL)
4P0123
72-60-42
Angle Gearbox Plug (AL)
4P0027
72-60-42
Angle Gearbox Radial Gearshaft Support (AL)
4B0211, 4B0272, 4B0355, 4B0375
72-60-42
Angle Gearbox Driving Bevel Radial Gearshaft (ST)
4B0196
72-60-42
Angle Gearbox Driving Bevel Radial Gearshaft Bearings
4T0011, 4T0013, 4T0014, 4T0015, 4T0016, 4T0021, 4T0023, 4T0024, 4T0025, 4T0026
72-60-42
Angle Gearbox Oil Duct (ST)
4B0259, 4B0297
72-60-42
Angle Gearbox Radial Gearshaft Coupling
4P0298 (ST)
4P0198
72-60-42
Angle Gearbox Driving Gearshaft Assembly Remaining Parts
4B0024 (ST), 4T0204, 4T0207, 4T0208, 4T0209
4T0205, 4T0206, 4T0210, 4W1246
72-60-43
Angle Gearbox Bearing Housing Diaphragm (ST)
4P0018
72-60-43
Angle Gearbox Driven Bevel Gearshaft (ST)
4P0224
72-60-43
Angle Gearbox Driven Bevel Gearshaft Bearings
4T0021, 4T0023, 4T0024, 4T0025, 4T0026, 4T0171, 4T0173, 4T0174, 4T0175, 4T0176
72-60-43
Angle Gearbox Driven Gearshaft Assembly - Remaining Parts
4P0020, 4T0204, 4T0205, 4T0206, 4P0213, 4W0002, 4W1253
72-60-43
Angle Gearbox Housing - A/O Bearing Ball
4B0019
72-60-43
Angle Gearbox Shroud - A/O Oil Bevel Gear
4B0133
