TASK 72-41-10-440-000 HPC Rotor Assembly - Assemble The Rotor Assembly, Assembly-000

DMC:V2500-A0-72-41-1000-00A-710A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-41-10-440-000 HPC Rotor Assembly - Assemble The Rotor Assembly, Assembly-000

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

  1. Information for the Assembly of the A1 Model HP Compressor Rotor Assembly is contained in the TASKS that follow:

    Measure the HP Compressor Rotor Assembly Parts TASK 72-41-10-440-001 (ASSEMBLY-001)

    Assemble the HP Compressor Rotor Assembly TASK 72-41-10-440-002-A00 (ASSEMBLY-002, CONFIG-001)

    Do a Balance Check of the HP Compressor Rotor Assembly and Install the Blades Pre SBE 72-0300 and Pre SBE 72-0304 (TASK 72-41-10-440-003-A00(ASSEMBLY-003, CONFIG-001)

    Do a Balance Check of the HP Compressor Rotor Assembly and Install the Blades SBE 72-0300 (TASK 72-41-10-440-003-C00(ASSEMBLY-003, CONFIG-003)

    Do a Balance Check of the HP Compressor Rotor Assembly and Install the Blades SBE 72-0304 (TASK 72-41-10-440-003-E00(ASSEMBLY-003, CONFIG-005)

    Grind the Tips of the HP Compressor Blades TASK 72-41-10-440-004-A00 (ASSEMBLY-004, CONFIG-001)

    Final Balance The HP Compressor Rotor Assembly TASK 72-41-10-440-005-A00 (ASSEMBLY-005, CONFIG-001)

  2. Information for the Assembly of the A5 Model HP Compressor Rotor Assembly is contained in the TASKS that follow:

    Measure the HP Compressor Rotor Assembly Parts TASK 72-41-10-440-001 (ASSEMBLY-001)

    Assemble the HP Compressor Rotor Assembly TASK 72-41-10-440-002-B00 (ASSEMBLY-002, CONFIG-002)

    Do a Balance Check of the HP Compressor Rotor Assembly and Install the Blades Pre SBE 72-0300 and Pre 72-0304 TASK 72-41-10-440-003-B00 (ASSEMBLY-003, CONFIG-002)

    Do a Balance Check of the HP Compressor Rotor Assembly and Install the Blades SBE 72-0300TASK 72-41-10-440-003-D00 (ASSEMBLY-003, CONFIG-004)

    Do a Balance Check of the HP Compressor Rotor Assembly and Install the Blades SBE 72-0304TASK 72-41-10-440-003-F00 (ASSEMBLY-003, CONFIG-006)

    Grind the Tips of the HP Compressor Blades TASK 72-41-10 (ASSEMBLY-004, CONFIG-002)

    Final Balance the HP Compressor Rotor Assembly TASK 72-41-10-440-005-B00 (ASSEMBLY-005, CONFIG-002)

Requirements After Job Completion

Follow-On Conditions

NONE