Export Control
EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.Copyright
© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).Applicability
All
Common Information
TASK 72-41-21-300-091 HPC Stage 7 Rotor Path Ring - Replace The Lining, Repair-091 (VRS9671)
Material of component
PART IDENT | MATERIAL |
HP compressor stage 7 rotor path ring | Corrosion resistant steel |
General
This is a source demonstrated repair that can only be accomplished by IAE approved vendors.
The repair vendor will provide the coating material.
Price and Availability
Refer to International Aero Engines.
Related Repairs
Repair the HP Compressor Stage 7 Rotor Path Ring (and Cone Assembly) Surface Protection, refer to Repair, VRS6161 TASK 72-41-21-300-004 (REPAIR-004).
Repair the HP Compressor Stage 6 Rotor Path Ring - Replace the Lining, refer to Repair, VRS6670 TASK 72-41-31-300-031 (REPAIR-031).
Repair the HP Compressor Stage 8 Rotor Path Ring - Replace the Lining, refer to Repair, VRS6663 TASK 72-41-21-300-092 (REPAIR-092).
NOTE
NOTE
Preliminary Requirements
Pre-Conditions
NONESupport Equipment
NONEConsumables, Materials and Expendables
NONESpares
NONESafety Requirements
NONEProcedure
The source demonstration requirements of this repair means that the facility not authorised to accomplish this repair either utilise the Authorised Repair Vendors listed below, or contact the IAE Repair Services Group to determine if a qualification program can be initiated at their facility.
IAE International Aero Engines AG
400 Main Street
M/S 121-10
East Hartford CT 06118
U.S.A.
Attn: Manager Technical Services
Authorised Repair Vendors for repair VRS6671 are listed below:
ROLLS-ROYCE AERO REPAIR AND OVERHAUL
East Kilbride
Glasgow
G74 4PY
SCOTLAND
MTU MAINTENANCE ZHUHAI
1 Tianke Road
Free Trade Zone
Zhuhai, Guangdong
519030
P.R. CHINA
MTU MAINTENANCE HANNOVER Gmbh
Muenchner Str.31
30855 Langenhagan
GERMANY
IHI CORPORATION
229 Tonogaya Mizuho-Machi
Nishitama-Gun
Tokyo 190-12
JAPAN
LUFTHANSA TECHNIK AG
HAM WR 420
PO Box 63 03 00
D-22313 Hamburg-Airport
GERMANY
PRATT AND WHITNEY COLUMBUS ENGINE CENTER
8801 Macon Road
M/S 906-05
Columbus
GA31908
USA
PRATT AND WHITNEY AIR NEW ZEALAND SERVICES
PO Box 14005
634 Memorial Avenue
Christchurch International Airport
Christchurch 8053
NEW ZEALAND
Rolls-Royce Inchinnan
Inchinnan Drive
Inchinnan Business Park
Inchinnan, PA4 9AF
Scotland
Asian Compressor Technology Services Co., Ltd.
1, Industrial 3rd Rd., Kuanyin Industrial Park, Kuanyin Dist.,
Taoyuan City
Taiwan 32853
MTU Aero Engines AG
Dachauer Strasse 665
80995 Muenchen
Germany
The designation by IAE of an Authorised Repair Vendor indicates that the Repair Vendor has demonstrated the necessary capability to enable it to carry out the listed repair work. However, IAE makes no warranties or representations concerning the qualifications or quality standards of the Repair Vendors to carry out the repair work and accepts no responsibility whatsoever for the work that may be carried out by a Repair Vendor other than when IAE is listed as the Repair Vendor. Authorised Repair Vendors do not act as agents or representatives of IAE.
Repair Facilities