TASK 72-00-40-420-000 HP System Module - Install The HP System Module, Installation-000

DMC:V2500-A0-72-00-4000-00A-720A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-00-40-420-000 HP System Module - Install The HP System Module, Installation-000

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Information for the Installation of the A1 Model HP System Module is contained in the TASKS that follow:

    1. Install the Partial HP System Module (Vertical) TASK 72-00-40-420-001-A00 (INSTALLATION-001, CONFIG-001)

    2. Turn the LP Compressor/Intermediate Case Module and the Partial HP System Module from the Vertical to the Horizontal Position TASK 72-00-40-560-002 (INSTALLATION-002)

    3. Turn the HP System Module from the Vertical to the Horizontal TASK 72-00-40-560-004 (INSTALLATION-003)

    4. Install the HP System Module (Horizontal) TASK 72-00-40-420-002-A00 (INSTALLATION-004, CONFIG-001)

    5. Install the HP System Module (Vertical) TASK 72-00-40-420-003-A00 (INSTALLATION-005, CONFIG-001)

    6. Turn the LP Compressor/Intermediate Case Module and the HP System Module from the Vertical to the Horizontal TASK 72-00-40-560-006 (INSTALLATION-006)

    7. Install the Initial HP System Module Components and Air Off-Take Ducts TASK 72-00-40-420-004 (INSTALLATION-007)

    8. Install the Components, the Ducts, the Electrical Harnesses and the Tubes to the HP Compressor Vertical Splitline TASK 72-00-40-420-005-A00 (INSTALLATION-008, CONFIG-001)

    9. Install and Connect the Components, the Electrical Harnesses and the Tubes on the Front of the HP Compressor Case TASK 72-00-40-420-006-A00 (INSTALLATION-009, CONFIG-001)

    10. Install the Components, Electrical Harnesses, Tubes and Brackets to the Turbine TASK 72-00-40-420-007-A00 (INSTALLATION-010, CONFIG-001)

    11. Install the Variable Stator Vane (VSV) Actuator TASK 72-00-40-450-001 (INSTALLATION-011)

    12. Install the Active Clearance Control (ACC) Actuator TASK 72-00-40-450-002 (INSTALLATION-012)

    13. Installation of the P3/T3 Sensor TASK 72-00-40-450-003 (INSTALLATION-013)

    14. Install the Igniter Plug TASK 72-00-40-450-004 (INSTALLATION-014)

    15. Install the Stage 10 to HP Turbine Air Valve TASK 72-00-40-450-005 (INSTALLATION-015)

    16. Install the Fuel Distribution Valve Filter TASK 72-00-40-450-006 (INSTALLATION-016)

    2. Information for the Installation of the A5 Model System Module is contained in the TASKS that follow:

    1. Install the Partial HP System Module (Vertical) TASK 72-00-40-420-001-B00 (INSTALLATION-001, CONFIG-002)

    2. Turn the LP Compressor/Intermediate Case Module and the Partial HP System Module from the Vertical to the Horizontal Position TASK 72-00-40-560-002 (INSTALLATION-002)

    3. Turn the HP System Module from the Vertical to the Horizontal TASK 72-00-40-560-004 (INSTALLATION-003)

    4. Install the HP System Module (Horizontal) TASK 72-00-40-420-002-B00 (INSTALLATION-004, CONFIG-002)

    5. Install the HP System Module (Vertical) TASK 72-00-40-420-003-B00 (INSTALLATION-005, CONFIG-002)

    6. Turn the LP Compressor/Intermediate Case Module and the HP System Module, from the Vertical to the Horizontal TASK 72-00-40-560-006 (INSTALLATION-006)

    7. Install the Initial HP System Module Components and Air Off-Take Ducts TASK 72-00-40-420-004 (INSTALLATION-007)

    8. Install the Components, the Ducts, the Electrical Harness and the Tubes to the HP Compressor Vertical Splitline TASK 72-00-40-420-005-B00 (INSTALLATION-008, CONFIG-002)

    9. Install and Connect the Components, the Electrical Harness and the Tubes on the Front of the HP Compressor Case Task 72-00-40-420-006-B00 (INSTALLATION-009, CONFIG-002)

    10. Install the Components, Electrical Harnesses, Tubes and Brackets to the HP Turbine TASK 72-00-40-420-007-B00 (72-00-40, INSTALLATION-10, CONFIG-2)

    11. Install the Variable Stator Vane (VSV) Actuator TASK 72-00-40-450-001 (INSTALLATION-011)

    12. Install the Active Clearance Control (ACC) Actuator TASK 72-00-40-450-002 (INSTALLATION-012)

    13. Installation of the P3/T3 Sensor TASK 72-00-40-450-003 (INSTALLATION-013)

    14. Install the Igniter Plug TASK 72-00-40-450-004 (INSTALLATION-014)

    15. Install the Full Distribution Valve Filter TASK 72-00-40-450-006 (INSTALLATION-016)

Requirements After Job Completion

Follow-On Conditions

NONE