TASK 72-41-20-440-000 HPC Rear Cases And Vanes Assembly - Assemble The HPC Rear Cases And Vanes, Assembly-000

DMC:V2500-A0-72-41-2000-00A-710A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-41-20-440-000 HPC Rear Cases And Vanes Assembly - Assemble The HPC Rear Cases And Vanes, Assembly-000

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

  1. Information for the Assembly of the A1 Model HP Compressor Rear Cases and Vanes is contained in the TASKS that follow:

    Assemble the HP Compressor Stage 7 Case and Stator Vanes TASK 72-41-20-440-001-A00 (Assembly-001, CONFIG-001)

    Assemble the HP Compressor Stage 8 Stator Vanes TASK 72-41-20-440-002-A00 (ASSEMBLY-002, CONFIG-001)

    Assemble the HP Compressor Stage 9 Stator Vanes TASK 72-41-20-440-003-A00 (ASSEMBLY-003, CONFIG-001)

    Assemble the HP Compressor Stage 10 Stator Vanes TASK 72-41-20-440-004-A00 (ASSEMBLY-004, CONFIG-001)

    Assemble the HP Compressor Stage 11 Stator Vanes TASK 72-41-20-440-005-A00 (ASSEMBLY-005, CONFIG-001)

    Machine the Stator Vane Tips and the Rotor Path Ring Liners TASK 72-41-20-440-006-A00 (ASSEMBLY-006, CONFIG-001)

    Disassemble the HP Compressor Rear Cases and Vanes TASK 72-41-20-440-007-A00 (ASSEMBLY-007, CONFIG-001)

  2. Information for the Assembly of the A5 Model HP Compressor Rear Cases and Vanes is contained in the TASKS that follow:

    Assemble the HP Compressor Stage 7 Case and Stator Vanes TASK 72-41-20-440-001-B00 (ASSEMBLY-001, CONFIG-002)

    Assemble the HP Compressor Stage 8 Stator Vanes TASK 72-41-20-440-002-B00 (ASSEMBLY-002, CONFIG-002)

    Assemble the HP Compressor Stage 9 Stator Vanes TASK 72-41-20-440-003-B00 (ASSEMBLY-003, CONFIG-002)

    Assemble the HP Compressor Stage 10 Stator Vanes TASK 72-41-20-440-004-B00 (ASSEMBLY-004, CONFIG-002)

    Assemble the HP Compressor Stage 11 Stator Vanes TASK 72-41-20-440-005-B00 (ASSEMBLY-005, CONFIG-002)

    Machine the Stator Vane Tips and the Rotor Path Ring Liners TASK 72-41-20-440-006-B00 (ASSEMBLY-006, CONFIG-002)

    Disassemble the HP Compressor Rear Cases and Vanes TASK 72-41-20-440-007-B00 (ASSEMBLY-007, CONFIG-002)

Requirements After Job Completion

Follow-On Conditions

NONE