TASK 72-00-50-020-000 LPT Module - Remove The LPT Module, Removal-000

DMC:V2500-A0-72-00-5000-00A-520A-B|Issue No:001.00|Issue Date:2014-05-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-00-50-020-000 LPT Module - Remove The LPT Module, Removal-000

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Information for the Removal of the A1 Model LP Turbine Module is contained in the TASKS that follow:

    1. Remove the LP Turbine Module Components, External Harnesses and Tubes TASK 72-00-50-020-001-A00 (REMOVAL-001, CONFIG-001)

    2. Remove the LP Turbine Module (Horizontal) - Method 1 TASK 72-00-50-020-002 (REMOVAL-002)

    3. Turn the LP Turbine Module Horizontal to Vertical (Front End Down) TASK 72-00-50-560-001 (REMOVAL-003)

    4. Remove the Turbine Exhaust Case (Horizontal) - Method 2 TASK 72-00-50-020-003 (REMOVAL-004)

    5. Remove the Turbine Exhaust Case (Horizontal) - Method 2 TASK 72-00-50-020-003-A00 (REMOVAL-004, CONFIG-001, Pre SBE 72-0063)

    6. Remove the Turbine Exhaust Case (Horizontal) - Method 2 TASK 72-00-50-020-003-B00 (REMOVAL-004, CONFIG-002, SBE 72-0063)

    7. Remove the LP Turbine Module without the Turbine Exhaust Case (TEC) - Method 2 TASK 72-00-50-020-004 (REMOVAL-005)

    8. Remove the LP Turbine Module (Vertical) - Method 2 TASK 72-00-50-020-005 (REMOVAL-006)

    9. Remove the LP Turbine Module (Vertical) - Method 2 TASK 72-00-50-020-005-A00 (REMOVAL-006, CONFIG-001, Pre SBE 72-0063)

    10. Remove the LP Turbine Module (Vertical) - Method 2 TASK 72-00-50-020-005-B00 (REMOVAL-006, CONFIG-002, SBE 72-0063)

    11. Removal of the Exhaust Gas Temperature (EGT) Thermocouple 4012KS-1, 4012KS-2, 4012KS-3, 4012KS-4 TASK 72-00-50-050-001 (REMOVAL-010)

    12. Removal of the EGT Harness and Junction Box Assembly (4012KS-5) TASK 72-00-50-050-002-A00 (REMOVAL-011, CONFIG-001)

    13. Remove the No.4 Bearing Compartment Air Cooler (ACAC) TASK 72-00-50-050-003 (REMOVAL-012)

    2. Information for the Removal of the A5 Model LP Turbine Module is contained in the TASKS that follow:

    1. Remove the LP Turbine Module Components, External Harnesses and Tubes TASK 72-00-50-020-001-B00 (REMOVAL-001, CONFIG-002)

    2. Remove the LP Turbine Module (Horizontal) - Method 1 TASK 72-00-50-020-002 (REMOVAL-002)

    3. Turn the LP Turbine Module Horizontal to Vertical (Front End Down) TASK 72-00-50-560-001 (REMOVAL-003)

    4. Remove the Turbine Exhaust Case (Horizontal) - Method 2 TASK 72-00-50-020-003 (REMOVAL-004)

    5. Remove the Turbine Exhaust Case (Horizontal) - Method 2 TASK 72-00-50-020-003-C00 (REMOVAL-004, CONFIG-003)

    6. Remove the LP Turbine Module without the Turbine Exhaust Case (TEC) - Method 2 TASK 72-00-50-020-004 (REMOVAL-005)

    7. Remove the LP Turbine Module (Vertical) - Method 2 TASK 72-00-50-020-005 (REMOVAL-006)

    8. Remove the LP Turbine Module (Vertical) - Method 2 TASK 72-00-50-020-005-C00 (REMOVAL-006, CONFIG-003)

    9. Removal of the Exhaust Gas Temperature (EGT) Thermocouple 4012KS-1, 4012KS-2, 4012KS-3, 4012KS-4 TASK 72-00-50-050-001 (REMOVAL-010)

    10. Removal of the EGT Harness and Junction Box Assembly (4012KS-5) TASK 72-00-50-050-002-B00 (REMOVAL-011, CONFIG-002)

    11. Remove the No.4 Bearing Compartment Air Cooler (ACAC) TASK 72-00-50-050-003 (REMOVAL-012)

Requirements After Job Completion

Follow-On Conditions

NONE