TASK 72-00-60-020-000 External Gearbox Module - Remove The External Gearbox Module, Removal-000

DMC:V2500-A0-72-00-6000-00A-520A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-00-60-020-000 External Gearbox Module - Remove The External Gearbox Module, Removal-000

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Information for the Removal of the A1 Model External Gearbox Module is contained in the TASKS that follow:

    1. Remove the LP Compressor/Intermediate Case Module Drains and Fire Detector TASK 72-00-60-020-001-A00 (CONFIG-001, REMOVAL-001)

    2. Remove the Tubes and the Electrical Harnesses from the External Gearbox TASK 72-00-60-020-002-A00 (REMOVAL-002, CONFIG-001)

    3. Remove the External Gearbox Module - Method 1 TASK 72-00-60-020-003-001 (REMOVAL-003)

    4. Remove the External Gearbox Module - Method 2 TASK 72-00-60-020-003-002 (REMOVAL-004)

    5. Remove the Dedicated Alternator Stator TASK 72-00-60-050-001-A00 (REMOVAL-005, CONFIG-001)

    6. Remove the Fuel Metering Unit (FMU) TASK 72-00-60-050-002-A00 (REMOVAL-006, CONFIG-001)

    7. Removal of the Oil Pressure Pump and Filter Assembly TASK 72-00-60-050-003 (REMOVAL-007)

    8. Remove the No.4 Bearing Compartment Scavenge Valve 4006EN TASK 72-00-60-050-004 (REMOVAL-008)

    9. Remove the Oil Quantity Transmitter TASK 72-00-60-050-005 (REMOVAL-009)

    10. Remove the Scavenge Oil Temperature Thermocouple TASK 72-00-60-050-006 (REMOVAL-010)

    11. Removal of the Scavenge Oil Pump TASK 72-00-60-050-007 (REMOVAL-011)

    12. Remove the LP/HP Fuel Pump 2001EM TASK 72-00-60-050-008 (REMOVAL-012)

    13. Remove the Pneumatic Starter TASK 72-00-60-050-009 (REMOVAL-013)

    14. Remove the Scavenge Oil Filter Element TASK 72-00-60-050-010 (REMOVAL-074)

    15. Remove the Pressure Oil Filter Element TASK 72-00-60-050-011 (REMOVAL-015)

    2. Information for the Removal of the A5 Model External Gearbox Module is Contained in the TASKS that follow:

    1. Remove the LP Compressor/Intermediate Case Module Drains and Fire Detector TASK 72-00-60-020-001-B00 (CONFIG-002, REMOVAL-001)

    2. Remove the Tubes and the Electrical Harnesses from the External Gearbox TASK 72-00-60-020-002-B00 (REMOVAL-002, CONFIG-002)

    3. Remove the External Gearbox Module - Method 1 TASK 72-00-60-020-003-001 (REMOVAL-003)

    4. Remove the External Gearbox Module - Method 2 TASK 72-00-60-020-003-002 (REMOVAL-004)

    5. Remove the Dedicated Alternator Stator TASK 72-00-60-050-001-B00 (REMOVAL-005, CONFIG-002)

    6. Remove the Fuel Metering Unit (FMU) TASK 72-00-60-050-002-B00 (REMOVAL-006, CONFIG-002)

    7. Removal of the Oil Pressure Pump and Filter Assembly TASK 72-00-60-050-003 (REMOVAL-007)

    8. Remove the No. 4 Bearing Compartment Scavenge Valve 4006EN TASK 72-00-60-050-004 (REMOVAL-008)

    9. Remove the Oil Quantity Transmitter TASK 72-00-60-050-005 (REMOVAL-009)

    10. Remove the Scavenge Oil Temperature Thermocouple TASK 72-00-60-050-006 (REMOVAL-010)

    11. Removal of the Scavenge Oil Pump TASK 72-00-60-050-007 (REMOVAL-011)

    12. Remove the LP/HP Fuel Pump 2001EM TASK 72-00-60-050-008 (REMOVAL-012)

    13. Remove the Pneumatic Starter TASK 72-00-60-050-009 (REMOVAL-013)

    14. Remove the Scavenge Oil Filter Element TASK 72-00-60-050-010 REMOVAL-014)

    15. Remove the Pressure Oil Filter Element TASK 72-00-60-050-011 REMOVAL-015)

    16. Removal of PMA Drive Gear Assembly SBE 72-0055TASK 72-00-60-050-012-B00 (REMOVAL-016, CONFIG-002)

Requirements After Job Completion

Follow-On Conditions

NONE