TASK 72-00-60-420-000 External Gearbox Module - Install The External Gearbox Module, Installation-000

DMC:V2500-A0-72-00-6000-00A-720A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-00-60-420-000 External Gearbox Module - Install The External Gearbox Module, Installation-000

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Information for the Installation of the A1 Model External Gearbox Module is contained in the TASKS that follow:

    1. Install the External Gearbox Module - Method 1 TASK 72-00-60-420-001-001 (INSTALLATION-001)

    2. Install the External Gearbox Module - Method 2 TASK 72-00-60-420-001-002 (INSTALLATION-002)

    3. Install the Tubes and Electrical Harnesses to the External Gearbox TASK 72-00-60-420-002-A00 (INSTALLATION-003, CONFIG-001)

    4. Install the LP Compressor/Intermediate Case Module Drains and Fire Detector TASK 72-00-60-420-003-A00 (CONFIG-001, INSTALLATION-004)

    5. Install the Dedicated Alternator Stator TASK 72-00-60-450-001-A00 (INSTALLATION-005, CONFIG-001)

    6. Install the Fuel Metering Unit (FMU) TASK 72-00-60-450-002-A00 (INSTALLATION-006, CONFIG-001)

    7. Installation of the Oil Pressure Pump and Filter Assembly TASK 72-00-60-450-003 (INSTALLATION-007)

    8. Install the No.4 Bearing Compartment Scavenge Valve 4006EN TASK 72-00-60-450-004 (INSTALLATION-008)

    9. Install the Oil Quantity Transmitter TASK 72-00-60-450-005 (INSTALLATION-009)

    10. Install the Scavenge Oil Temperature (SOT) Thermocouple TASK 72-00-60-450-006 (INSTALLATION-010)

    11. Installation of the Scavenge Oil Pump TASK 72-00-60-450-007 (INSTALLATION-011)

    12. Install the LP/HP Fuel Pump TASK 72-00-60-450-008 (INSTALLATION-012)

    13. Install the Pneumatic Starter TASK 72-00-60-450-009 (INSTALLATION-013)

    14. Install the Scavenge Oil Filter Element TASK 72-00-60-450-010 (INSTALLATION-014)

    15. Install the Pressure Oil Filter Element TASK 72-00-60-450-011 (INSTALLATION-015)

    16. Installation of PMA Drive Gear Assembly Pre SBE 72-0055TASK 72-00-60-450-012-A00 (INSTALLATION-016, CONFIG-001)

    17. Installation of PMA Drive Gear Assembly SBE 72-0055TASK 72-00-60-450-012-B00 (INSTALLATION-016, CONFIG-002)

    2. Information for the Installation of the A5 Model External Gearbox Module is contained in the TASKS that follow:

    1. Install the External Gearbox Module - Method 1 TASK 72-00-60-420-001-001 (INSTALLATION-001)

    2. Install the External Gearbox Module - Method-2 TASK 72-00-60-420-001-002 (INSTALLATION-002)

    3. Install the Tubes and Electrical Harnesses to the External Gearbox TASK 72-00-60-420-002-B00 (INSTALLATION-003, CONFIG-002)

    4. Install the LP Compressor/Intermediate Case Module Drains and Fire Detector TASK 72-00-60-420-003-B00 (CONFIG-002, INSTALLATION-004)

    5. Install the Dedicated Alternator Stator TASK 72-00-60-450-001-B00 (INSTALLATION-005, CONFIG-002)

    6. Install the Fuel Metering Unit (FMU) TASK 72-00-60-450-002-B00 (INSTALLATION-006, CONFIG-002)

    7. Installation of the Oil Pressure Pump and Filter Assembly TASK 72-00-60-450-003 (INSTALLATION-007)

    8. Install the No. 4 Bearing Compartment Scavenge Valve 4006EN TASK 72-00-60-450-004 (INSTALLATION-008)

    9. Install the Oil Quantity Transmitter TASK 72-00-60-450-005 (INSTALLATION-009)

    10. Install the Scavenge Oil Temperature (SOT) Thermocouple TASK 72-00-60-450-006 (INSTALLATION-010)

    11. Installation of the Scavenge Oil Pump TASK 72-00-60-450-007 (INSTALLATION-011)

    12. Install the LP/HP Fuel Pump TASK 72-00-60-450-008 (INSTALLATION-012)

    13. Install the Pneumatic Starter TASK 72-00-60-450-009 (INSTALLATION-013)

    14. Install the Scavenge Oil Filter Element TASK 72-00-60-450-010 (INSTALLATION-014)

    15. Install the Pressure Oil Filter Element TASK 72-00-60-450-011 (INSTALLATION-015)

    16. Installation of PMA Drive Gear Assembly TASK 72-00-60-450-012-C00 (INSTALLATION-016, CONFIG-003)

Requirements After Job Completion

Follow-On Conditions

NONE