TASK 72-00-32-020-000 LPC/Intermediate Case Module - Remove The LPC/Intermediate Case Module, Removal-000

DMC:V2500-A0-72-00-3200-00A-520A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-00-32-020-000 LPC/Intermediate Case Module - Remove The LPC/Intermediate Case Module, Removal-000

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. The information for the removal of the A1 Model LP Compressor/Intermediate Case Module is contained in the TASKS that follow:

    1. Remove the Hydraulic Tubes, the Thermal Anti-ice Duct, the Pneumatic Starter Duct and the EEC Cooling Ducts from the LP Compressor/Intermediate Case Module TASK 72-00-32-020-001-A00 (REMOVAL-001, CONFIG-001)

    2. Remove the LP Compressor/Intermediate Case Electrical Harnesses TASK 72-00-32-020-002-A00 (REMOVAL-002, CONFIG-001)

    3. Remove the LP Compressor/Intermediate Case Tubes and the Electrical Harness Raceways TASK 72-00-32-020-003-A00 (REMOVAL-003, CONFIG-001)

    4. Remove the Components from the LP Compressor/Intermediate Case Module TASK 72-00-32-020-004 (REMOVAL-004)

    5. Remove the LP Compressor/Intermediate Case Brackets and the Bifurcation Panel TASK 72-00-32-020-005-A00 (REMOVAL-005, CONFIG-001)

    6. Turn the LP Compressor/Intermediate Case Module Horizontal to Vertical TASK 72-00-32-560-001 (REMOVAL-007)

    7. Removal of the Electronic Engine Control (EEC) TASK 72-00-32-050-001 (REMOVAL-008)

    8. Remove the Relay Box TASK 72-00-32-050-002 (REMOVAL-009)

    9. Remove the Fuel Temperature Thermocouple TASK 72-00-32-050-003 (REMOVAL-010)

    10. Remove the Air Cooled Oil Cooler (ACOC) Oil Temperature Thermocouple TASK 72-00-32-050-004 (REMOVAL-011)

    11. Remove the Fuel Flow Transmitter TASK 72-00-32-050-006 (REMOVAL-013)

    12. Remove the Air Modulating Valve TASK 72-00-32-050-007 (REMOVAL-014)

    13. Remove the Pneumatic Starter Valve TASK 72-00-32-050-008 (REMOVAL-015)

    14. Remove the Stage 7 Air Solenoid Valve TASK 72-00-32-050-009 (REMOVAL-016)

    15. Remove the Stage 10 Air Solenoid Valve 4028KS TASK 72-00-32-050-010 (REMOVAL-017)

    16. Remove the Stage 10 Solenoid Valve TASK 72-00-32-050-011 (REMOVAL-018)

    17. Remove the Stage 7 and 10 Air Solenoid Valve TASK 72-00-32-050-012 (REMOVAL-019)

    18. Remove the Fuel Diverter and Return Valve 4018KS TASK 72-00-32-050-013 (REMOVAL-020)

    19. Remove the IDG Oil Temperature Thermocouple TASK 72-00-32-050-015 (REMOVAL-022)

    20. Remove the Low Pressure Oil Switch TASK 72-00-32-050-016 (REMOVAL-023)

    21. Remove the Oil Pressure Transmitter TASK 72-00-32-050-017 (REMOVAL-024)

    22. Remove the Scavenge Filter Differential Pressure Switch TASK 72-00-32-050-019 (REMOVAL-026)

    23. Remove the Fuel Filter Element 2000EM TASK 72-00-32-050-020 (REMOVAL-027)

    24. Remove the Fuel Filter Differential Pressure Switch TASK 72-00-32-050-021 (REMOVAL-028)

    25. Remove the Fuel Cooled Oil Cooler (FCOC) TASK 72-00-32-050-022 (REMOVAL-029)

    26. Remove the Data Entry Plug Assembly from the Fan Case TASK 72-00-32-050-023-A00 (REMOVAL-030, CONFIG-001)

    2. The information for the removal of the the A5 Model LP Compressor/Intermediate Case Module is contained in the TASKS that follow:

    1. Remove the Hydraulic Tubes, the Thermal Anti-ice Duct, the Pneumatic Starter Duct and the EEC Cooling Ducts from the LP Compressor/Intermediate Case Module TASK 72-00-32-020-001-B00 (REMOVAL-001, CONFIG-002)

    2. Remove the LP Compressor/Intermediate Case Electrical Harnesses TASK 72-00-32-020-002-B00 (REMOVAL-002, CONFIG-002)

    3. Remove the Compressor/Intermediate Case Tubes and Electrical Harness Raceways TASK 72-00-32-020-003-B00 (REMOVAL-003, CONFIG-002)

    4. Remove the Components from the LP Compressor/Intermediate Case Module TASK 72-00-32-020-004 (REMOVAL-004)

    5. Remove the LP Compressor/Intermediate Case Brackets and the Bifurcation Panel TASK 72-00-32-005-B00 (REMOVAL-005, CONFIG-002)

    6. Turn the LP Compressor/Intermediate Case Module Horizontal to Vertical TASK 72-00-32-560-001 (REMOVAL-007)

    7. Removal of the Electronic Engine Control (EEC) TASK 72-00-32-050-001 (REMOVAL-008)

    8. Remove the Relay Box TASK 72-00-32-050-002 (REMOVAL-009)

    9. Remove the Fuel Temperature Thermocouple TASK 72-00-32-050-003 (REMOVAL-010)

    10. Remove the Air Cooled Oil Cooler (ACOC) Oil Temperature Thermocouple TASK 72-00-32-050-004 (REMOVAL-011)

    11. Remove the Fuel Flow Transmitter TASK 72-00-32-050-006 (REMOVAL-013)

    12. Remove the Air Modulating Valve TASK 72-00-32-050-007 (REMOVAL-014)

    13. Remove the Pneumatic Starter Valve TASK 72-00-32-050-008 (REMOVAL-015)

    14. Remove the Stage 7 Air Solenoid Valve TASK 72-00-32-050-009 (REMOVAL-016)

    15. Remove the Stage 10 Air Solenoid Valve 4028KS TASK 72-00-32-050-010 (REMOVAL-017)

    16. Remove the Stage 10 Solenoid Valve TASK 72-00-32-050-011 (REMOVAL-018)

    17. Remove the Stage 7 and 10 Air Solenoid Valve TASK 72-00-32-050-012 (REMOVAL-019)

    18. Remove the Fuel Diverter and Return Valve 4018KS TASK 72-00-32-050-013 (REMOVAL-020)

    19. Remove the IDG Oil Temperature Thermocouple TASK 72-00-32-050-015 (REMOVAL-022)

    20. Remove the Low Pressure Oil Switch TASK 72-00-32-050-016 (REMOVAL-023)

    21. Remove the Oil Pressure Transmitter TASK 72-00-32-050-017 (REMOVAL-024)

    22. Remove the Scavenge Filter Differential Pressure Switch TASK 72-00-32-050-019 (REMOVAL-026)

    23. Remove the Fuel Filter Element 2000EM TASK 72-00-32-050-020 (REMOVAL-027)

    24. Remove the Fuel Filter Differential Pressure Switch TASK 72-00-32-050-021 (REMOVAL-028)

    25. Remove the Fuel Cooled Oil Cooler (FCOC) TASK 72-00-32-050-022 (REMOVAL-029)

    26. Remove the Data Entry Plug Assembly from the Fan Case TASK 72-00-32-050-023-B00 (REMOVAL-030, CONFIG-002)

Requirements After Job Completion

Follow-On Conditions

NONE