TASK 72-00-32-420-000 LPC/Intermediate Case Module - Install The LPC/Intermediate Case Module, Installation-000

DMC:V2500-A0-72-00-3200-00A-720A-B|Issue No:001.00|Issue Date:2013-11-01

Export Control

EAR Export Classification: Not subject to the EAR per 15 C.F.R. Chapter 1, Part 734.3(b)(3), except for the following Service Bulletins which are currently published as EAR Export Classification 9E991: SBE70-0992, SBE72-0483, SBE72-0580, SBE72-0588, SBE72-0640, SBE73-0209, SBE80-0024 and SBE80-0025.

Copyright

© IAE International Aero Engines AG (2001, 2014 - 2021) The information contained in this document is the property of © IAE International Aero Engines AG and may not be copied or used for any purpose other than that for which it is supplied without the express written authority of © IAE International Aero Engines AG. (This does not preclude use by engine and aircraft operators for normal instructional, maintenance or overhaul purposes.).

Applicability

All

Common Information

TASK 72-00-32-420-000 LPC/Intermediate Case Module - Install The LPC/Intermediate Case Module, Installation-000

Preliminary Requirements

Pre-Conditions

NONE

Support Equipment

NONE

Consumables, Materials and Expendables

NONE

Spares

NONE

Safety Requirements

NONE

Procedure

    1. Information for the Installation of the A1 Model LP Compressor/Intermediate Case Module is contained in the TASKS that follow:

    1. Install the LP Compressor/Intermediate Case Brackets and the Bifurcation Panel TASK 72-00-32-420-001-A00 (INSTALLATION-001, CONFIG-001)

    2. Install the Components on the LP Compressor/Intermediate Case Module TASK 72-00-32-420-002 (INSTALLATION-002)

    3. Install the LP Compressor/Intermediate Case Tubes and the Electrical Harness Raceways TASK 72-00-32-420-003-A00 (INSTALLATION-003, CONFIG-001)

    4. Install the LP Compressor/Intermediate Case Electrical Harnesses TASK 72-00-32-420-004-A00 (INSTALLATION-004, CONFIG-001)

    5. Install the Hydraulic Tubes, the Thermal Anti-ice Duct, the Pneumatic Starter Duct and the EEC Cooling Ducts to the LP Compressor/Intermediate Case Module TASK 72-00-32-420-005 (INSTALLATION-005, CONFIG-001)

    6. Turn the LP Compressor/Intermediate Case Module Vertical to Horizontal TASK 72-00-32-560-002 (INSTALLATION-007)

    7. Installation of the Electronic Engine Control (EEC) TASK 72-00-32-450-001 (INSTALLATION-008)

    8. Install the Relay Box TASK 72-00-32-450-002 (INSTALLATION-009)

    9. Install the Fuel Temperature Thermocouple TASK 72-00-32-450-003 (INSTALLATION-010)

    10. Install the Air Cooled Oil Cooler (ACOC) Oil Temperature Thermocouple TASK 72-00-32-450-004 (INSTALLATION-011)

    11. Install the Fuel Flow Transmitter TASK 72-00-32-450-006 (INSTALLATION-013)

    12. Install the Air Modulating Valve TASK 72-00-32-450-007 (INSTALLATION-014)

    13. Install the Pneumatic Starter Valve TASK 72-00-32-450-008 (INSTALLATION-015)

    14. Install the Stage 7 Air Solenoid Valve TASK 72-00-32-450-009 (INSTALLATION-016)

    15. Install the Stage 10 Air Solenoid Valve 4028KS TASK 72-00-32-450-010 (INSTALLATION-017)

    16. Install the Stage 10 Solenoid Valve TASK 72-00-32-450-011 (INSTALLATION-018)

    17. Install the Stage 7 and 10 Air Solenoid Valve TASK 72-00-32-450-012 (INSTALLATION-019)

    18. Install the Fuel Diverter and Return Valve 4018KS TASK 72-00-32-450-013 (INSTALLATION-020)

    19. Install the IDG Oil Temperature Thermocouple TASK 72-00-32-450-015 (INSTALLATION-022)

    20. Install the Low Pressure Oil Switch TASK 72-00-32-450-016 (INSTALLATION-023)

    21. Install the Oil Pressure Transmitter TASK 72-00-32-450-017 (INSTALLATION-024)

    22. Install the Scavenge Filter Differential Pressure Switch TASK 72-00-32-450-019 (INSTALLATION-026)

    23. Install the Fuel Filter Element 2000EM TASK 72-00-32-450-020 (INSTALLATION-027)

    24. Install the Fuel Filter Differential Pressure Switch TASK 72-00-32-450-021 (INSTALLATION-028)

    25. Install the Fuel Cooled Oil Cooler (FCOC) TASK 72-00-32-450-022 (INSTALLATION-029)

    26. Install the Data Entry Plug Assembly on the Fan Case TASK 72-00-32-450-023-A00 (INSTALLATION-030, CONFIG-001)

    2. Information for the Installation of the A5 Model LP Compressor/Intermediate Case Module is contained in the TASKS that follow:

    1. Install the LP Compressor/Intermediate Case Brackets and the Bifurcation Panel TASK 72-00-32-420-001-B00 (INSTALLATION-001, CONFIG-002)

    2. Install the Components on the LP Compressor/Intermediate Case Module TASK 72-00-32-420-002 (INSTALLATION-002)

    3. Install the LP Compressor/Intermediate Case Tubes and the Electrical Harness Raceways TASK 72-00-32-420-003-B00 (INSTALLATION-003, CONFIG-002)

    4. Install the LP Compressor/Intermediate Case Electrical Harnesses TASK 72-00-32-420-004-B00 (INSTALLATION-004, CONFIG-002)

    5. Install the Hydraulic Tubes, the Thermal Anti-ice Duct and the Pneumatic Starter Duct to the LP Compressor/Intermediate Case Module TASK 72-00-32-420-005-B00 (INSTALLATION-005, CONFIG-002)

    6. Turn the LP Compressor/Intermediate Case Module Vertical to Horizontal TASK 72-00-32-560-002 (INSTALLATION-007)

    7. Installation of the Electronic Engine Control (EEC) TASK 72-00-32-450-001 (INSTALLATION-008)

    8. Install the Relay Box TASK 72-00-32-450-002 (INSTALLATION-009)

    9. Install the Fuel Temperature Thermocouple TASK 72-00-32-450-003 (INSTALLATION-010)

    10. Install the Air Cooled Oil Cooler (ACOC) Oil Temperature Thermocouple TASK 72-00-32-450-004 (INSTALLATION-011)

    11. Install the Fuel Flow Transmitter TASK 72-00-32-450-006 (INSTALLATION-013)

    12. Install the Air Modulating Valve TASK 72-00-32-450-007 (INSTALLATION-014)

    13. Install the Pneumatic Starter Valve TASK 72-00-32-450-008 (INSTALLATION-015)

    14. Install the Stage 7 Air Solenoid Valve TASK 72-00-32-450-009 (INSTALLATION-016)

    15. Install the Stage 10 Air Solenoid Valve 4028KS TASK 72-00-32-450-010 (INSTALLATION-017)

    16. Install the Stage 10 Solenoid Valve TASK 72-00-32-450-011 (INSTALLATION-018)

    17. Install the Stage 7 and 10 Air Solenoid Valve TASK 72-00-32-450-012 (INSTALLATION-019)

    18. Install the Fuel Diverter and Return Valve 4018KS TASK 72-00-32-450-013 (INSTALLATION-020)

    19. Install the IDG Oil Temperature Thermocouple TASK 72-00-32-450-015 (INSTALLATION-022)

    20. Install the Low Pressure Oil Switch TASK 72-00-32-450-016 (INSTALLATION-023)

    21. Install the Oil Pressure Transmitter TASK 72-00-32-450-017 (INSTALLATION-024)

    22. Install the Scavenge Filter Differential Pressure Switch TASK 72-00-32-450-019 (INSTALLION-026)

    23. Install the Fuel Filter Element 2000EM TASK 72-00-32-450-020 (INSTALLATION-027)

    24. Install the Fuel Filter Differential Pressure Switch TASK 72-00-32-450-021 (INSTALLATION-028)

    25. Install the Fuel Cooled Oil Cooler (FCOC) TASK 72-00-32-450-022 (IINSTALLATION-029)

    26. Install the Data Entry Plug Assembly on the Fan Case TASK 72-00-32-450-023-B00 (INSTALLATION-030, CONFIG-002)

Requirements After Job Completion

Follow-On Conditions

NONE